DIY

Leather goods will never go out of fashion. And to create a leather wallet with your own hands is simple and interesting. Even if leatherworking is not your hobby, with simple author instructions, the result will be great. You will need a piece of not too hard skin. Cutting it best with a metal ruler and torch.

In this review, the author makes an original chair-chair with his own hands. It is useful for relaxing in the country, in the garden or on the territory of a private house. The main material for its manufacture is a profile pipe and board. Of the tools for work, you will need a grinder (angle grinder) or a manual circular tool, an electric drill and a welding machine.

A hermetic bag is an indispensable thing for a hike. If you rarely engage in tourism, then most likely you will not find a waterproof cover on the farm. In this review, the author tells how to make a cover from improvised means that is not inferior in quality to the factory one. You will need approximately seven plastic bags.

For cafes, small pubs, bars or restaurants, the bar counter is an integral element of the interior. However, today small bar counters are quite often installed in a private house, where, as you know, kitchens are much more spacious than in apartments. In this review, the author shows how to make a bar counter for a house from a profile pipe and boards (wooden lining).

In this review, the author shows how to make an original seat with a toilet lid from epoxy and colored pencils. Such a seat can be installed on the toilet and whether on a bucket (for example, so that the child can go to the toilet while on the street). This project will require colored pencils.

In this review, we will no longer talk about homemade products, but about the hobbies of masters in general. Although we will also tell you about the idea for a gearshift knob. As you know, each master’s hobbies are different: someone likes to cut wooden spoons, while others are interested in coming up with various useful ways. There are also such masters who like to build miniature houses from real building materials.

In this review, the author shows how to make a pot with pockets for plants with your own hands. The sewer pipe acts as the main material. The first step is to cut a piece of plastic pipe of a suitable size. Then it will be necessary to clean the surface with sandpaper.

In this review, the author shows the process of making a concrete tabletop for a table. To do this, from pieces of chipboard or laminated (formwork) plywood, you need to make the shape of the right size. The internal seams of the mold must be passed with silicone sealant. This is required in order to eliminate the leakage of the concrete mixture, or rather, the water that it contains.

In this review, the author shows how, with your own hands and relatively inexpensively, you can turn an old Soviet-hardened table into a stylish coffee table in a modern manner. The old Soviet table can be found in many houses and apartments. If you don’t have one available, you can search for ads - very often they are given away for free.

From a profile pipe 10x10 mm and a tree, the author will make a wall shelf in the hallway. It can store keys and other small things. For the manufacture of shelves, the author decided to use forged elements that look very beautiful. We recommend reading: a simple home-made jig for making curls in a garage or home workshop.

In this review, the author shows how you can decorate old metal doors so that they look beautiful and harmonize with the surrounding interior. In order for the water-based paint to fit well on the metal surface, which is covered with alkyd enamel, it will be necessary to treat the doors with sandpaper.

In this review, the author shows how to make a rather unusual and very beautiful combined pattern on a square bar with a cross section of 10 * 10 mm with your own hands. First, cut a small piece of suitable length from a square bar. Next, you need to make markup. First, on each side, draw a center line that will be a guideline.

In this review, the master, using the figure of a wolf, will show how you can make the original “nozzle” (cap) for the towbar with your own hands. The first step is to make a silicone cast. And for this you need plasticine, with which the author will make the sides. You will also need more coating silicone, which must be applied with a brush.

Stylish strict geometry in a modern design can transform any room, and make it exclusive. In this review, the author tells how to create a table with unusual catchy lines of the foundation with your own hands. To realize this idea, you will need eight long rectangular bars.

In this review, the author decided to make a soft pouf out of a car tire. A very unusual idea, but it has the right to life. Such an original and practical piece of furniture can be used both in the country and in the house. The pouf looks very stylish. The main material for making ottoman is a rubber tire from a passenger car (you can use old and bald tires).

What do (usually or most often) do with glass bottles left over after a feast? Right! They are thrown into the trash. Why, instead of just throwing it away, turn them into beautiful glass goblets that will look just as good as purchased? As the saying goes: why buy what you can do with your own hands?

Pots for plants can be plastic or made of concrete. But in this review, the author decided to make a pot of brick. Do-it-yourself products are always relevant, and please the eye better than purchased ones. Home-made pots for plants will be appropriate both in the summer cottage and in the territory of a private house.

Do you need a compact, mobile and most importantly - an inexpensive coffee table? Then let's do it with our own hands. The basis for the manufacture of the table is an old wooden pallet. Also required are wheels on a turntable and ceramic tiles. First of all, the wooden pallet will need to be sanded.

In this review, the author shows the manufacturing process of a heated outdoor coffee table. The table itself is made of brick and cement. The technology is very simple - everyone will repeat without problems. In the center of the table there is a recess in which you can place a basket with coals, and on top is placed dishes with tea or coffee.

If the usual garden scarecrow seems boring to the owners, you can always make someone more terrible. Even if such a ghost does not scare the raven, night passersby will definitely not leave it unattended. In this review, the author tells and shows how to make a ghost-lamp for your private house or cottage with your own hands.