Unusual design of a sliding metal door

Pin
Send
Share
Send

In this review, the author shares the idea of ​​how to make an unusual sliding double-wing door from metal with your own hands.

Using the same technology, for example, a garage door can be made. Dimensions - at your discretion. If desired, the door can be made wide enough.

For example, in this review, each leaf of a sliding door consists of four parts that are connected to each other using hinges.

In the upper and lower parts of the valves there are rollers that move along rigidly fixed guides.

Recommended reading:

  1. Home-made doors for the wardrobe on the bus technology
  2. How to decorate old doors to look beautiful

Design features

To install such sliding doors, it will be necessary to fix the guides from the profile on the wall and floor.

Moreover, it is advisable to make a groove in the floor with the help of a grinder and a disk for concrete (or using a chamfer), in which the guide will fit.

After the lower and upper guides are fixed, you can proceed with the installation of the sliding door.

How do you like this idea? What would you modify in this design? Write about it in the comments. We are interested in hearing your opinion.

A detailed overview of installing a sliding metal door can be seen in the video below.

Pin
Send
Share
Send

Watch the video: Evolution Door (March 2024).