In this review, the author shows how to make a compact stove-stove from a gas (propane) cylinder. Good option for a summer residence.
Before cutting the cylinder with a grinder, it is necessary to rinse it several times (including draining the condensate) and fill it with water.
Next, cut off the upper part of the propane cylinder, then cut a round hole in the lower part.
Four legs from the profile pipe will need to be welded on the side of the cylinder. We clean the welds with a grinder with a petal circle.
The main stages of work
The master welds a piece of a round pipe to the hole cut out at the bottom of the gas cylinder.
In the previously cut off upper part of the cylinder, a square “window” needs to be cut. We weld a piece of the profile pipe with a cap to it.
At the next stage, another rectangular hole will need to be cut out in the cylinder.
We bend the edges in different directions, then we weld a piece of a metal plate to them. The result is a hob.
Next, bend a piece of the profile into a ring and cut one of the walls. We put the hoop on the cylinder, and weld the upper part to it.
Inside the profile pipe, the author lays a ceramic cord. Then the door is welded to the container using two hinges.
At the last stage, it remains only to make a grate, as well as to clean the surface of the cylinder and parts with a grinder and paint.
For details on how to make a compact stove-stove from a propane cylinder, see the video.
