How to make an adjustable handle for angle grinder

Pin
Send
Share
Send

The standard handle for a large and small grinder is fixed in only one position - at an angle of 90 degrees with respect to the body. However, in some cases this is not entirely convenient. To make working with angle grinders as comfortable as possible, you can make a homemade adjustable handle, or rather a movable adapter for it.

Having made yourself a homemade pen with an adapter, you can independently adjust the load on the hands, as a result of which they will be less tired in the process of long work. To make the adapter yourself at home, you will need a metal plate, a steel strip, a bolt with an M10 nut. All materials can easily be found in the workshop and garage.

Adjustable handle for angle grinder: work stages

In a piece of a thick metal plate, it is necessary to drill a hole for the M10 bolt, from which we cut off the cap and weld to the walls of the hole. In the lateral part, we drill a through hole for the grinder handle. Next, you need to slightly round the edges with a grinding disc - this is necessary more for aesthetics.

We cut two short segments from the steel strip, after which we fasten them to the first part. We weld a thick plate on top. We grind the resulting structure, and cut the threads in the side hole. Then we install the adapter first, and screw the handle into it. Now it will be much more convenient to work with a grinder.

Pin
Send
Share
Send

Watch the video: Homemade Angle Grinder Stand Angle Grinder Support. (March 2024).