Imagine a situation - a lamp fell off your table. The plafond shattered. Look around. Around there are many things from which it will turn out to be a worthy replacement for a failed device.
In this review, we will tell you how to make a stylish table lamp with your own hands from an ordinary wooden hanger.
In this case, a wooden hanger will act as a lamp rack. We take out the hook from it, it will not be needed. A piece of thick plywood is suitable for the stand. Mark the circle and saw it with an electric jigsaw.
The main stages of work
Carefully process the circle with sandpaper. For side mounts from plywood 10 mm thick, we make two semicircles. We mark it on the site and screw it with screws. On the shoulder and stand we drill landing holes.
Using the screw we assemble the structure. He can also adjust the angle. Stand assembly - ready. Now you can do the electrical part.
We get the elastic from the fabric braid. In its place we retract the wire. We melt the ends and remove the insulation. On one side we fasten the wires to the plug. We thread the second into the previously prepared holes so that the wire does not sag, and attach the lamp holder. Check - everything works great.
For our homemade it took a little time. Two pieces of plywood. Old harness, cartridge, wire and plug with socket. The result is a convenient and original lamp - assembled with your own hands.
