In this review, the author offers an idea - how to make an outdoor shower to the cottage from your ordinary wooden pallet (you can even old).
Only in this case it is not a classic soul in the form of a "booth" with a watering can on top. The author decided to make a simple portable shower of a non-standard design.
For its manufacture, a pallet is used, as well as segments of a polypropylene pipe and fittings.
First of all, if the pallet is old, it will need to be restored. For this, the author “strengthens” it with nails and self-tapping screws.
The main stages of work
When the foundation of the summer shower is ready, the master proceeds to manufacture a "watering can", which will be located at the bottom of the pallet.
This will require four pieces of a polypropylene water pipe 50 cm long (25 mm diameter) and three short pieces of arbitrary length, as well as corners for connecting the pipes.
At the next stage, using a welding iron for PP pipes, we connect all the workpieces into a single structure. One side will need to be drowned out.
We fasten the clips to the bottom of the pallet and fix the resulting "watering can". Then we turn the pan over, make a markup and drill holes in the PP pipes through which water will flow.
Moreover, it is best to drill with a step drill: it will make a hole and it will remove the chamfer. We connect the irrigation hose, install an outdoor shower in the right place and you can take water procedures.
For details on how to make a non-standard summer shower at the cottage from the old pallet, see the video on the website.
