DIY wall horizontal bar made of scraps of metal

Pin
Send
Share
Send

Very often, after repairs in a private house or in the country, or after the manufacture of any homemade products, scraps of metal remain.

They can be used to make other useful devices. For example, you can make your own wall horizontal bar.

The first step is to cut off the necessary blanks.

To make the horizontal bar, you will need: 2 pieces of a profile pipe, 2 corners and a piece of steel round pipe.

In profile pipes, it will be necessary to drill one hole (according to the diameter of a round pipe). The author does this with a metal crown.

We recommend reading: do-it-yourself universal wall-mounted horizontal bar exercise machine.

The main stages of work

In the next step, you will need to drill mounting holes in two sections of the building corner.

In this case, the master uses a conventional drill for metal. Corners must be welded to the profile pipes at an angle of 90 degrees.

The author decided to further strengthen the junction of the profile pipe and the building corner with a piece of profile.

At the last stage, it remains only to insert pieces of a round pipe into the profile pipes, and scald them. Welds must be cleaned with angle grinders.

After this, you can already proceed to the assembly of the structure and its subsequent installation.

For details on how to make a wall horizontal bar from scraps of metal with your own hands, see the video.

Pin
Send
Share
Send

Watch the video: Homemade Parallettes - Best for Dips, Rows, Abs - DIY Dudes (March 2024).