Ladybug

Pin
Send
Share
Send

Every day a child learns something new, for him, any fact is a real discovery. You can learn about the life of representatives of the animal world from observations of them, reading information in encyclopedias, watching feature films or videos on the Internet. But it’s important for the baby not only to see and hear, but also to touch. Therefore, layouts come to the rescue. Adults are experienced and can accurately convey the structure and appearance of a particular representative of the fauna.
Today you will learn how to make a ladybug, which is located on a piece of wood.
The following materials are needed for work:
- a piece of thick cardboard;
- newspaper;
- black colored paper;
- plastic bag;
- marker;
- scissors;
- a needle with a thread;
- pen or pencil;
- glue in a tube;
- self-adhesive film of green, red and black colors.
First, we cut out a piece of wood from thick cardboard. It can be of any shape.
Now it needs to be pasted over with a green self-adhesive film.

We cut one piece of rectangular shape, a little more than the leaf itself.

Wrap the edges of the film on the wrong side.

Next, we cut the workpiece in the form of a cardboard base.

And glue on the back of the leaf. The basis of the future crafts is ready.

Now we turn to the manufacture of a ladybug.
Cut out an oval from cardboard with a small semicircle in front. This is the shape of the bug.

We glue the blank on one side with a newspaper. This must be done so that the volume is obtained.

We cut out two transparent wings from a plastic bag and draw stripes - veins with a black marker.

We glue them on the blank of a ladybug, after pasting it with black colored paper.

Now we cut out two blanks from ordinary cardboard - these will be rigid wings.

We glue them on both sides with a red self-adhesive film and make cuts in the center.

We connect the incisions so that the bends appear on the wings. Thanks to this, the bug will receive a stable volume.

We fix hard red wings near the head of the insect. This can be done with a needle and thread.

The place of attachment of parts must be decorated with a black self-adhesive film. We glue the head of the bug with it.
It remains only to glue 7 black circles cut out of the film.

On the reverse side, our billet is generously greased with glue. And glue to the green leaf.

Now make 6 paws. You can take a cocktail tube, cut it into segments 1 cm long, glue it with a black self-adhesive film and bend it in half.

Glue the paws to the body. We make two antennae.

Here is such a magnificent ladybug turned out.

A child can examine it, raise the upper elytra and examine the transparent wings.

In addition, such a bright craft will be a wonderful decoration of the interior of your kids' room.

Pin
Send
Share
Send

Watch the video: Miraculous Ladybug - Kwami Buster English Dub (November 2024).